Table of Contents
Advertisement
Introduction
This section will guide you through mounting and installation.
Important
The warranty is restricted to units that have been correctly mounted and installed by
trained personnel only.
Packaging and
HCV500 is delivered packaged in a cardboard box.
contents
Check the box for any transport damage before opening.
Do not use a knife to open the box!
Check the contents of the cardboard box:
Wall bracket and spacers.
Drain hose
Prior to
Before mounting, consider the following:
installation
Installation
The unit's controls make it possible to change the air flow path to and from the
unit between the right and left sides (A/B
Read more in the general description on page 6.
The change feature ensures optimal installation conditions no matter where the
unit is placed in the building.
The HCV500 unit is designed for mounting in dry surroundings at temperatures
over 12°C, such as technical rooms or other suitable spaces.
Make sure there is plenty of room – especially in front of the unit to ensure it is
accessible for servicing and maintenance.
Ensure that the wall is suitable for carrying the weight of the unit.
mode
).
Continued overleaf
15
Advertisement
Table of Contents
