Use Of Lan Interface - Dantherm HCV500 Service Manual

Use of LAN interface

Introduction
Setup IP address
30
HCV500 is supplied with an Ethernet connection for the reading and checking of
the unit's operation via a BMS system.
Every unit must have its own IP address on the computer network to identify
the unit.
Dynamic IP address allocation:
If the unit is connected to a router with built-in DHCP server it will fetch the IP address
itself from the router when the unit starts up.
Static IP address allocation:
Using PC-Tool it is possible to allocate a static IP address to the unit, which is necessary
for example in order to perform checks on HCV500 via smartphone app when outside
the LAN's range. This will also require setup of the home's WAN address as well as allo-
cating a port on the router.