15.10
Changing the position light lamp
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Pull bulb socket
–
Pull position light lamp
–
Insert a new position light lamp in the bulb socket.
Position light (W5W / socket W2.1x9.5d) (
–
Insert the bulb socket in the reflector.
E00038-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
ELECTRICAL SYSTEM 15
1
out of the reflector.
2
out of the bulb socket.
p. 198)
p. 193)
p. 255)
p. 194)
197