21 Troubleshooting - Husqvarna 701 Enduro Owner's Manual

21 TROUBLESHOOTING

Faults
The engine does not turn when
the start button is pressed
Engine turns only if the clutch
lever is drawn
Engine turns but does not
start.
240
Possible cause
Operating error
12 V battery discharged
Fuse 1, 2 or 3 blown
Main fuse blown
No ground connection present
The vehicle is in gear
The vehicle is in gear and the
side stand is folded out
Operating error
Fuse 3 blown
Quick release coupling not
joined
Malfunction in the electronic
fuel injection
Throttle opened while starting
Action
–
Carry out start procedure. (
–
Charge the 12-V battery.
–
Check the open-circuit current.
–
Change the fuses of individual electri-
cal power consumers. (
–
Change the main fuse. (
–
Check the ground connection.
–
Shift the transmission to neutral posi-
tion.
–
Shift the transmission to neutral posi-
tion.
–
Carry out start procedure. (
–
Change the fuses of individual electri-
cal power consumers. (
–
Join quick release coupling.
–
Read out the fault memory using the
Husqvarna Motorcycles diagnostics
tool.
–
When starting, DO NOT open the
throttle.
–
Carry out start procedure. (
p. 67)
( p. 183)
p. 190)
p. 185)
p. 67)
p. 190)
p. 67)