13 BRAKE SYSTEM
13.1
134
Anti-lock braking system (ABS)
H01077-10
1
The ABS module
, consisting of a hydraulic unit, an ABS con-
trol unit, and a return pump, is located under the seat. One wheel
2
speed sensor
is located in each case on the front and the
rear wheel.
Warning
Danger of accidents Changes to the vehicle impair the
function of the ABS.
–
Only allow the rear wheel to spin with the front brake
applied if the ABS is switched off (burn out).
–
Do not make any changes to the suspension travel.
–
Only use spare parts on the brake system which have
been approved and recommended by Husqvarna
Motorcycles.
–
Only use tires/wheels approved by Husqvarna Motor-
cycles with the corresponding speed index.
–
Maintain the specified tire pressure.
–
Service work and repairs must be performed profes-
sionally. (Your authorized Husqvarna Motorcycles
workshop will be glad to help.)