Removing The Seat; Mounting The Seat - Husqvarna 701 Enduro Owner's Manual

12.9

Removing the seat

12.10

Mounting the seat

SERVICE WORK ON THE CHASSIS 12
–
1
Pull on loop
–
Pull off the seat sideways at the front ends from the side
cover.
–
Pull seat back and lift it off.
S02152-10
–
Stretch the seat at the front ends slightly and position holding
1
tabs on holders
The holding tabs engage in the holder.
–
Press holding tabs
–
Insert locking pin
down the rear of the seat until the locking pin engages with
an audible click.
–
Check, finally, that the seat is correctly mounted.
V00497-10
while raising the rear of the seat.
2
.
3 A
into bushings .
4 5
into the lock housing and push
109