Husqvarna 701 Enduro Owner's Manual page 228

18 SERVICE WORK ON THE ENGINE
226
–
Position oil screen
–
Position the pin wrench through the drill hole of the screw
plug in the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
F00586-10
–
Mount and tighten screw plug
Guideline
Plug, oil screen
F00587-10
bk
with the O-rings on a pin wrench.
9
with the O-ring.
M20x1.5 15 Nm (11.1 lbf ft)