Husqvarna 701 Enduro Owner's Manual page 122

12 SERVICE WORK ON THE CHASSIS
120
–
Raise the motorcycle with the rear lifting gear. (
Info
The check is also possible when the motorcycle is
resting on the side stand.
–
Shift the transmission to neutral position.
–
Push the chain upward at a distance
ing guard and determine chain tension
Info
The top part of chain
Chain wear is not always even. Repeat this measure-
ment at different chain positions.
Chain tension
B
Distance
guard
S01048-10 » If the chain tension does not meet the specification:
–
Adjust the chain tension. (
–
Remove the rear of the motorcycle from the lifting gear.
( p. 104)
B
from the chain slid-
A
.
C
must be taut.
A 5 mm (0.2 in)
30 mm (1.18 in)
to chain sliding
p. 121)
p. 103)