Husqvarna 701 Enduro Owner's Manual page 162

13 BRAKE SYSTEM
160
–
Check that spring plate
6
plate in the brake caliper bracket are seated correctly.
–
Insert the new brake linings, insert the pin, and mount the
cotter pins.
Info
Always change the brake linings in pairs.
–
Operate the foot brake lever repeatedly until the brake lin-
400419-11
ings are in contact with the brake disc and there is a pressure
point.
–
Adjust the brake fluid level to the MAX marking.
Brake fluid DOT 4 / DOT 5.1 (
–
Mount the screw cap with the washer and membrane.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
5
in the brake caliper and sliding
p. 266)