Installation Guide Linear Motors
temperature and to shut off the motor in case of a fault. If the drive can no longer communicate with the
motor, then it will shift to a fault state. Feedback is provided to the control system.
The position is sensed by measuring the magnetic field of the slider.
The stator is encapsulated and welded completely shut.
ATEX linear motors can be equipped with a copper cooling system as an option.
3.2 Exterior view
Water cooling
connection
Stator with windings (cast under vacuum)
Page 10 / 40
Kty sensors under
stainless steel housing
P01-48 EX protected
ENG
Copper tubing for
water cooling
NTI AG / LinMot