C) Configuration With An Post-Fitting Check; Central Unit - Intratone Intracode Visio Manual

C
C)
ONFIGURATION WITH AN
Exit from menus or
Return to scrolling menu
- How do I enter settings mode?
o Check that the welcome message is scrolling on the LCD screen
o Press the ֠ ֠ ֠ ֠ key until the "Enter password" menu appears.
o Type the serial number of the EEN-CIC12 central unit (7xxxxxx3).
o Validate with the ֠ ֠ ֠ ֠ key. "You are in menu settings mode"
- To exit settings mode:
o Press the
message.
Menu options in settings mode:
Setting
the clock
|
|
|
|
|
|
Door
settings
|
|
|
Volume of
call panels
INTERNET Update
Request
Check fitting
|
|
Warning: the "door settings" menu will appear only if switches 4 / 5 / 6 on the EEN-
CIC12 central unit are set to
EN-V233 – 5003 – AB Installation and use of the EEN-PICV Intracode Visio call panel
I
NTRACODE
Validation
"Save changes"
Entering numbers
arrow key several times until you return to the scrolling
Date: 28/01/13
Day: Monday
Time: 09:15
Type: winter
Accept remote
time: YES
Door settings
PB:NO Opening time:
05s
֠ ֠ ֠ ֠ or
Direct selection
of the volume
Request an Update?
Test number:
֠ ֠ ֠ ֠
OFF.
EEN-CIC12

CENTRAL UNIT

Numeric keys for date entry
Key to select day
Numeric keys for time entry
Key to select summer/winter season
Key to select YES or NO
Key to select: NO or NC
Numeric keys for door-opening time entry
Key to Exit
Key ֠ to Validate
Enables direct input via the keypad of the
volume of the call panel connected
Key ֠ to Validate
Enables direct input via the keypad of the
telephone number to call for test purposes.
Start test procedure
Go into menus or Make a
selection
Page 7 / 11