Extron electronics IPCP Pro Series Setup Manual page 10

IPCP Pro Series • Setup Guide (Continued)
Dual-NIC models — LAN ports
Corporate
PC TCP/IP
Network
Rear
Panels
00- - 0 0 5-A6-XX-XX-X
MAC: 00 00-05-A6-XX-XX X -XX
IPC C P AV
S/N: # # ## # #### E#### # ##
A V A V A A LAN LAN
2
Po o E+ OUT
NOTE: IPCPs with more than one LAN or AV LAN port function as multiport, unmanaged
network switches so you can connect additional devices to the same network.
Dual-NIC models — AV LAN ports
Ethernet
Insert Twisted
Pair Wires
RJ-45
Connector
Pins:
8 7 6 5 4 3 2 1
00-05-A6-XX-XX-XX
MAC: 00-05-A6-XX-XX-XX
IPCP AV LAN
S/N: ####### E######
AV LAN
1 2
PoE+ OUT
NOTE: IPCPs with more than one LAN or AV LAN
port function as multiport, unmanaged network
switches so you can connect additional
devices to the same network.
10
Ethernet
Insert Twisted
Pair Wires
RJ-45
Connector
Ethernet
Pins:
8 7 6 5 4 3 2 1
Activity
LED
X X 00-05-A6-XX-XX-XX
MAC: 00-05-A6-YY-YY-YY
LAN IPCP LAN
S/N: ####### E######
LAN
3
or
PoE+ O O UT
AV
PC
Network
Ethernet
00-0 0 5-A6-XX-XX X -XX
MAC: 00- - 05-A6-YY-YY-YY or
IPCP LAN
S/N: ### # #### E######
LAN
3
Activity
LED
PoE+ OUT
PC
Corporate
TCP/IP
Network
Dual-NIC LAN
(Ethernet)
Default protocol, LAN
ports:
• LAN IP address:
192.168.253.250
• Gateway IP address:
0.0.0.0
• Subnet mask:
255.255.255.0
Link
MAC: 00-05-A6-XX-XX-XX
• DNS address: 127.0.0.1
S/N: ####### E######
LED
• DHCP client: off
• Link speed and duplex
LAN
level: autodetected
• Data rates:
10/100/1000Base-T
A V A
Default login
LA A N
credentials:
• Username: admin
MAC: 00-0 0 5-A6-YY-YY-Y YY-Y Y
S/N: #### # ### E###### E###
• Password: extron
PC
AV
AV LAN (Ethernet)
Network
Default protocol,
AV LAN:
• IP address:
192.168.254.250
• Gateway IP address:
0.0.0.0
• Subnet mask:
255.255.255.0
Rear
• DNS address: 127.0.0.1
Panels
• DHCP client: off
(disabled)
• DHCP server off
MAC: 00-0 0 5-A6-XX-XX-X XX-X X X
S/N: #### # ### E###### E###
(disabled)
• Link speed and duplex
LA A N
level: autodetected
• Data rates:
10/100/1000Base-T
AV Link
Default login
LAN
LED
credentials:
• Username: admin
MAC: 00-05-A6-YY-YY-YY
• Password: extron
S/N: ####### E######
The AV LAN DHCP Server is disabled by default. It can be enabled to dyanmically assign
IP addresses to DHCP clients on the AV LAN.
Default protocol, AV LAN when
DHCP server is enabled:
• DHCP server IP address: 192.168.254.1
• Subnet mask: 255.255.255.0
• Gateway: 0.0.0.0
• DNS address: 192.168.254.1
• DHCP dynamic address range for client
devices: 192.168.254.100 -
192.168.254.149
• Maximum served addresses when
DHCP server is enabled: 50
• DHCP client address lease time: 24 hours.
Front
Panels
AV LAN LAN
1 2 3
1000 1
L LINK
ACT
Front
Panels
AV LAN LAN
1 2 3
1 1000
LINK L
ACT
AV LAN DHCP Server
To use DHCP in the AV LAN:
1. Using Toolbelt, enable the DHCP server
for the AV LAN within the control
processor (see the software or
programming help le for details).
2. Enable DHCP on each client AV device
(see the user guide for each product).
3. Connect client AV devices to the AV LAN.
1000 Mbps
Connection
Network is
active.
Data is being
sent/received.
1000 Mbps
Connection
Network is
active.
Data is being
sent/received.