Personal Computer Interface; Recommended Professional Installer Basic Rules - jablotron JA-65 MAESTRO Installation Manual

14. Personal Computer Interface

The JA-65 system can be connected to a Personal Computer
(PC) locally, using the PC-60A (Com port) or PC-60B (USB
port) interface cable. If JA-65X module is installed, then it is
also possible to dial into the system from a remote PC using
the JA-60U modem (see JA-65X). Comlink software is
available for Windows system.
User can check and operate the JA-65 system easily via their
PC, can read complete events memory with all details, can
view the map of the installation (seeing topical triggering of the
"virtual" control panel access & complete events list
programming dialogs
15. Recommended Professional installer
basic rules
If you install the system for a customer, you should follow
these rules:
•
make a drawing of intended location of the items,
keeping in mind proper protection for the intended
area.
•
if the customer requests reduction of the system
(price reasons etc.), ask for a written confirmation that
he does not
recommended (to avoid blame and liability if poorly
covered area is robed in the future)
Alarm system JA-65 MAESTRO
want the particular items
detectors) etc. However, the user can not change settings of
the system.
Installer who has access rights can program the system, can
check the communication quality of the items, can view the
level of interference in the location etc. There is also a
convenient
includes a library of components.
Depending on your access rights, the Comlink software will
allow you to open the corresponding screens (see following
examples). There is a comprehensive help file in the Comlink
program.
item testing window & RF signal oscilloscope
map of the system (shows current conditions in the house)
•
make a professional installation and do not forget to
clean and be tidy.
•
it is very important to explain to the customer all
functions of the system, to teach to him or her how to
program access codes, how to test the system and
how to replace batteries in the items
•
offer your regular assistance for testing and battery
replacement (we recommend annually)
•
make a written report signed by the customer, that the
installation was finished properly and that she or he
received your training on how to operate and test the
you
system
- 15 -
tool to make a map of the installation, which
MFM53003