Connecting The Smart Device To The Same Network As The Printer; Procedure Outline For Wi-Fi Direct Connection (Simple Ap Mode) - Epson PictureMate PM-401 User Manual

User's Guide

Connecting the Smart Device to the Same Network as the Printer

Connect a smart device to a printer that is already connected to the network by Wi-Fi.
1. Install Epson iPrint on your smart device from the following URL or QR code.
http://ipr.to
2. Select Wi-Fi from the settings screen on your smart device, and then enable Wi-Fi.
See the manual provided with your smart device for the operating instructions.
3. Select the same SSID as the printer, and then enter the password.
You can check the SSID that the printer has already connected to from the network status screen on the
printer's control panel or by printing a network connection report. For the SSID and password, contact the
person who set up the access point, or see the manual provided with the access point.
4. After establishing a connection, return to the home screen on the smart device.
You can check the connection between the printer and the smart device using Epson iPrint.
Related Information
"Checking the Connection Using Epson iPrint" on page 62
&
"Checking the Printer's Network Status" on page 65
&

Procedure Outline for Wi-Fi Direct Connection (Simple AP Mode)

This connection method allows you to use the printer in Simple AP mode and connect devices by Wi-Fi. Make the
following settings in order.
Connecting the Printer to the Smart Device or Computer
56