Change The Display Unit Type; Transfer The Screen Data To Gp-4501T/Tw - Pro-face GP4000 Series Replacement Manualbook

3.5 Change the Display Unit Type

(* Only when replacing with GP-4501T)
Open the project file (*.prx) on GP-Pro EX that is converted in the Chapter 3.4 and
change the display unit type to GP-4501T.
(1) Open the converted project file (*.prx) on GP-Pro EX.
(2) Click [System Settings]->[Display]->[Change Display] in [Project] menu and
change the Display Unit type to GP-4501T.
(3) Click [Project]->[Save] or [Save As] to save the change.

3.6 Transfer the screen data to GP-4501T/TW

Transfer the project file after conversion to GP-4501T/TW.
You can transfer data to GP-4501T/TW via;
An USB transfer cable (model: CA3-USBCB-01)
・
An USB data transfer cable (model: ZC9USCBMB1)
・
A commercial USB cable (USB Type A/mini B)
・
A SD card/A USB storage device
・
Ethernet
・
But, this section explains, as an example, how to transfer screen data with an USB
transfer cable (model: CA3-USBCB-01).
34/55