Change The Display Unit Type - Pro-face GP-2300T Manual

IMPORTANT
・ In the [Question] dialog box, be sure to select [Yes] and specify the destination
folder. If you select [No], images will not be called correctly.
・ GP-4301T/TW that is a replacement model is not equipped with a CF card slot.
If a destination folder is created in the work above, the CF card setting will be
replaced with the SD card setting automatically.
To check or change the destination folder setting, see
of the external media to

3.5 Change the Display Unit Type

(* Only when replacing GP-2300L with GP-4301TW)
Open the project file (*.prx) on GP-Pro EX that is converted in the Chapter 3.4 and
change the display unit type to GP-4301TW.
(1) Open the converted project file (*.prx) on GP-Pro EX.
(2) Click [System Settings]->[Display]->[Change Display] in [Project] menu and
change the Display Unit type to "GP-4301TW".
(3) Click [Project]->[Save] or [Save As] to save the change.
use].
38/59
[5.1 Changing the setting