Max/Min Mode; Viewing Max/Min Values - Ambient Weather WS-1900A User Manual

[SET] Alarm High Daily Rain
[SET] Exit alarm settings mode.
[ALARM] + 2 seconds means press and hold the ALARM button for two seconds.
[ALARM] means press the ALARM button.

6.9 Max/Min Mode

6.9.1 Viewing Max/Min Values

To view the max value, press (do not hold) the MAX/MIN button, and the max values will be displayed, as shown in
Figure 20 (a). To clear the max values, press and hold the MAX/MIN button while the max values are displayed.
To view the low alarm settings, press the MAX/MIN button again, and the min values will be displayed, as shown in
Figure 20 (b). To clear the min values, press and hold the MAX/MIN button while the min values are displayed.
To return to normal mode, press the MAX/MIN button again.
6.9.1.1 Display Wind Chill, Heat Index vs. Dew Point Max/Min Values
While the max values are displayed as outlined in Section 6.9.1, press the TEMP button once to view the heat index,
twice to view the dew point, and a third time to return to outdoor temperature.
While the min values are displayed as outlined in Section 6.9.1, press the TEMP button once to view the wind chill,
twice to view the dew point, and a third time to return to outdoor temperature.
6.9.1.2 Display Wind Speed vs. Wind Gust Max Values
While the max values are displayed as outlined in Section 6.9.1, press the WIND + button once to view the max
wind gust, and twice to return to wind speed.
6.9.1.3 Display Rain Rate, Daily Rain, Weekly Rain and Monthly Rain Max Values
While the max values are displayed as outlined in Section 6.9.1, press the RAIN button once to view the max daily
rain, twice to view the max weekly rain, three times to view the max monthly rain, four times to return to the max
rain rate.
6.9.1.4 Display Absolute and Relative Pressure Min and Max Values
While the max values are displayed as outlined in Section 6.9.1, press and hold the PRESSURE button for two
Version 1.2
Press [WIND +] or [PRESSURE -] to adjust alarm value up or
down.
Press [ALARM] to turn the alarm on. The alarm icon
appear.
Press [ALARM] to turn the alarm off. The alarm icon will
disappear.
(a)
©Copyright 2020, Ambient LLC. All Rights Reserved.
Figure 19
Figure 20
(b)
Page 22
will