Max/Min Mode; Viewing Max/Min Values - Ambient Weather WS-2902B User Manual

[SET] Alarm High Wind Speed
[SET] Alarm High Wind Gust
[SET] Alarm High Rain Rate
[SET] Alarm High Daily Rain
[SET] Exit alarm settings mode.
[ALARM] + 2 seconds means press and hold the ALARM button for two seconds.
[ALARM] means press the ALARM button.

6.9 Max/Min Mode

6.9.1 Viewing Max/Min Values

To view the max value, press (do not hold) the MAX/MIN button, and the max values will be
displayed, as shown in Figure 25 (a). To clear the max values, press and hold the MAX/MIN button
while the max values are displayed.
To view the low alarm settings, press the MAX/MIN button again, and the min values will be
displayed, as shown in Figure 25 (b). To clear the min values, press and hold the MAX/MIN button
Version 2.0 ©Copyright 2020, Ambient LLC. All Rights Reserved.
Press [WIND +] or [PRESSURE -] to adjust alarm
value up or down.
Press [ALARM] to turn the alarm on. The alarm
icon will appear.
Press [ALARM] to turn the alarm off. The alarm
icon will disappear.
Press [WIND +] or [PRESSURE -] to adjust alarm
value up or down.
Press [ALARM] to turn the alarm on. The alarm
icon will appear.
Press [ALARM] to turn the alarm off. The alarm
icon will disappear.
Press [WIND +] or [PRESSURE -] to adjust alarm
value up or down.
Press [ALARM] to turn the alarm on. The alarm
icon will appear.
Press [ALARM] to turn the alarm off. The alarm
icon will disappear.
Press [WIND +] or [PRESSURE -] to adjust alarm
value up or down.
Press [ALARM] to turn the alarm on. The alarm
icon will appear.
Press [ALARM] to turn the alarm off. The alarm
icon will disappear.
Figure 24
Page 29