The Pack; Unpacking The 3D Printer; Accessories - CraftBot CB4 FLOW Series User Manual

3. THE PACK

3.1. UNPACKING THE 3D PRINTER

1. Place the CraftBot box on the ground on a level surface. Make sure that there is a
lot of open space around you.
2. Open the box with care, not to damage the contents if using a blade. Be careful and
watch out for the printer as well.
3. Remove the protective foam insert. You will find the Quick Starter Guide located
within the top protective foam insert.
4. There is a Box inserted, which contains the accessories (including a pendrive with a
copy of the CraftBot user manual). Remove the Box with care as it supports the
extruder during shipping.
5. Now you will find the CraftBot 3D printer itself completely enclosed in a protective
plastic bag. Open the plastic covering.
6. Firmly grasp the frame of the CraftBot. Consider its weight. Request physical help
if needed.
7. Make sure not to touch the extruder or the electronic panel inside the appliance!
8. Place the CraftBot 3D printer on a stable and level surface with sufficient space
surrounding around it.

3.2. ACCESSORIES

Below you can see con- tents of the box. First of all, check the list to make sure nothing
is missing!
•
Filament guide tube holder (2x)
•
Filament guide tube (2x)
•
Filament spool holder (2x)
•
Filament spool (2x)
•
Hex wrenches (5x)
•
Pendrive
•
USB A-B cable and AC power cable
•
Nozzle kit (2x)
•
Cleaning kit
8