Printing Objects From Mycraftbot Platform - CraftBot CB4 FLOW Series User Manual

11.3. PRINTING OBJECTS FROM MYCRAFTBOT PLATFORM

•
In the Print menu, drag the gcode of the file you want to print into the Drag and
Drop bar.
•
If the uploaded file appears in the list, select it and then start printing with the start
icon. Confirm your decision with pop-ups, and then printing will begin.
•
The Dashboard also changes as you print.
o The Temperature and Extrude menus are deactivated. After printing,
these menus will be active again.
o The Pause and Stop buttons are activated.
o The print bar shows the percentage of printing
o Use the temperature chart to keep track of head and tray temperatures.
Data is updated every second.
31