CraftBot FLOW IDEX XL Quick Start Manual

Thank you for purchasing a CraftUnique product and welcome to the world of 3D crafting!
You are just a few steps away from having your first 3D object printed by your brand new
CraftBot Flow.

UNPACKING

You've already found the Quick Start Guide. Excellent! Now remove the protective cardboard
cover. There is a Box inserted, which contains the accessories (including a pendrive with
a copy of the CraftBot user manual). Remove the Box with care as it supports the extruder during
shipping.
1.
Now you will find the CraftBot FLOW XL 3D printer itself completely enclosed
in a protective plastic bag. Open the plastic bag covering.
2. Firmly grasp the frame of the CraftBot at the desired lifting points left and right side
of the printer frame in the plexi glass cut outs. Consider its weight. Request physical
help when lifting. Make sure not to touch the extruder or the electronic panel inside
the appliance!
3. Place the CraftBot 3D printer on a stable and level surface with sufficient space
surrounding around it.

CONTENTS OF THE BOX

It's time to unpack additional parts.
Below you can see contents of the box.
First of all, check the list to make sure
nothing is missing!
1. Filament guide tube holder (2x)
2.
Filament guide tube (2x)
3. Filament spool holder (2x)
4. Filament spool (2x)
5. Hex wrenches (5x)
6.
Pendrive
7.
USB A-B cable
and AC power cable
8. Nozzle kit (2x)
9. Cleaning kit
You should also get a spool of PLA filament along with the box containing your CraftBot.
QUICK START GUIDE
1 2
4 5
7 8
3
6
9
www.craftbot.com