Pause Menu; Stop / End Printing - CraftBot CB4 FLOW Series User Manual

•
There are two types of fan:
•
the interion LED lighting
•
LCD display backlighting
•
Extrude
•
This menu is inactive while printing. Active in
Pause menu after head stops.
•
Encoder
•
In the Settings
•
You can on or off the encoder.

10.5. PAUSE MENU

If you want to pause printing touch the Pause button
You can also adjust the as same values as in the Option
menu while printing is paused:
•
temperature
•
speed
•
light
•
extrude
•
encoder
•
camera
However, in the pause menu, the Extrude
you can retract or extract filaments from the head.

10.6. STOP / END PRINTING

• To stop printing, press the
confirmation.
• When printing is finished, wait for the build plate to cool and then gently pry
the plate to snap the printed object down
menu select the Encoder
button and printing will stop after
button.
on the right icon bar.
menu is also available, where
29