CraftBot CB4 FLOW Series User Manual page 25

Printer under the Printer tab page. You can add objects, .stl, .obj files onto this
virtual build plate and get an impression of what the real life print will look like.
•
Select your desired Dual Head mode By clicking on Dual Mode button
change the Dual Head mode. There are four of them:
•
Dual Extruder Mode: you can assign an extruder for each object in the
project.
•
Support Mode: lets you select one of the extruders to create the support
bars.
•
Parallel Mode: duplicates the objects, and print them simultaneously.
•
Mirror Mode: duplicates and mirror the objects, and print them
simultaneously.
•
Click on the "Add" button
plan you must print. The selected object will appear at the center of the virtual
build plate. If Dual Extruder Mode is enabled, you can assign heads in the List View
under the Selection tool.
•
To generating the toolpath information (gcode) Click on the Slice button
right side of the screen. A new screen pops up with options to specify the printing
quality and material to be used.
•
Saving the gcode by clicking the "slice" button bottom right.
•
You can save
the printer or send information directly to CraftBot if connected via USB cable. For
detailed user's instruction of CraftWare, download the user manual from
https://craftunique.com/docs/craftware-user-manual
located in the top row of icons. Select the 3D design
the generated gcode onto a USB drive and place it into the top of
you can
to the
25