Using The Mycraftbot; Login; Mainmenu - CraftBot CB4 FLOW Series User Manual

11. USING THE MYCRAFTBOT

11.1. LOGIN

•
When you first login, write the IP address of your printer into
the web browser eg
•
Login to the site with the username and password you
entered, and then change your password.
o Username: admin
o Password: adminadmin

11.2. MAINMENU

•
After logging in, the Dashboard interface of the web interface opens. Here
we can track the print data.
•
You can start, restart, pause, or stop printing in the top horizontal action
bar.
•
Below you can see the current state of the printer, the head and the print
tray heating.
•
On the left you can see the main menus. These are used to prepare the
printer before printing. After you start printing, some of the menus will be
inactive, such as extrude, temperature.
http://10.0.1.101/login
30