Table of Contents
Advertisement
Description of the device
Features
The
Standing Mirrorball
is a mirrorball from Showtec.
• Operated by batteries or by DC Adapter
• Mirrorball diameter: 20 cm.
• 2 rotations p. min.
• Plug-&-Play
Overview
Fig. 1
Installation
Damages caused by non-observance are not subject to warranty.
Mirrorballmotor Installation
Procedure :
1. On the bottom of the device are the holes for the installation.
2. Hold the device to surface, where you want to install it.
3. Mark the spots with a marker, where you want to drill the holes.
4. Drill the holes in the marked installation spot.
5. Hold the device in the desired position and fasten the screws.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the powercord to the wall and the mirrorball will start turning.
5
Advertisement
Table of Contents
