Storage; Installation; Package Contents And Inspection - Phocos Any-Grid Series User And Installation Manual

Model Height (mm)
PSW-G-1KW-1P 411
PSW-G-2KW-1P 411
PSW-G-3KW-1P 411
PSW-G-4KW-1P 518
PSW-G-5KW-1P 573
4.0

Storage

If the inverter is not put into use immediately, the storage of inverter should meet the following requirements:

Do not remove the outer carton packaging.

The inverter needs to be stored in a clean and dry place. Prevent the erosion of dust and water vapor.

The storage temperature should be kept at -40 °C ~ +70 °C, and the relative humidity should be kept at
5%RH ~ 95%RH.

The stacking of inverters is recommended to be placed according to the number of stacking layers in the
original shipment. Place the inverter carefully during stacking to avoid personal injury or equipment
damage caused by the falling of equipment.

Keep away from chemically corrosive substances that may corrode the inverter.

Periodic inspections are required. If damages are found by worms and rats, or packages are found to be
damaged, the packaging materials must be replaced in time.

After long-term storage, inverters need to be inspected and tested by qualified personnel before put into
use.
5.0

Installation

This chapter describes how to install the inverter and connect it to the grid-tied solar system (including the
connection between solar modules, public grid and inverter).
Read this chapter carefully and ensure all installation requirements are met before installation. Only qualified
electricians are allowed to install the inverter.

Package Contents and Inspection

The inverter has been thoroughly tested and rigorously checked before delivery, but damage may still occur during
transportation. Before unpacking, check carefully whether the product information in the order is consistent with
that on the nameplate of the package box and whether the product package is intact. If any damage is detected,
please contact the shipping company or the supplier directly. Please also provide photos of the damage to get our
www.phocos.com
Figure 6: Carton packaging dimensions
Width (mm) Depth (mm)
418 251
418 251
418 251
480 284
480 284
Gross Weight (kg) Packaging Material
11 Cardboard
11 Cardboard
11 Cardboard
17 Cardboard
17 Cardboard
8 | P a g e