Product Overview - Phocos Any-Grid Series User And Installation Manual


The inverter input voltage cannot exceed the maximum input voltage; otherwise inverter damage
may occur.

The positive and negative pole of solar modules cannot be grounded, otherwise irrecoverable
damage may occur.

Ensure the proper grounding of the inverter, otherwise, improper connection or no grounding
may cause stop of the inverter.

Ensure reliable installation and electrical connection.
Note: PSW-G series grid-tied solar inverters are only for crystalline silicon solar modules.
Grid-Tied Operation

Only qualified electricians are allowed to operate the inverter under the permission of local power
departments.

All electrical connections must meet the electrical standards of the countries/regions in which the
project is located.

Ensure reliable installation and electrical connection before operation.

Do not open the cover of inverter during operation or voltage is present.
Maintenance and Inspection

Only qualified electricians are allowed to perform the maintenance, inspection, and components
replacement of the inverter.

Contact with the local dealer or supplier for maintenance.

In order to avoid irrelevant personnel from entering the maintenance area during maintenance,
temporary warning labels must be placed to warn non-professionals to enter or use fence for
isolation.

Firstly, disconnect all power supplies of the grid to the inverter before any maintenance, and then
disconnect the DC breakers and wait for at least 5 minutes until the inverter is discharged before
maintenance.

Please follow electrostatic protection norms and take correct protective measures because of the
electrostatic sensitive circuits and devices in the inverter.

Do not use parts and components not provided by our company during maintenance.

Restart the inverter after settling the fault and problem which may affect the safety and
performance of the inverter.

Do not get close to or touch any metal conductive part of the grid or inverter, otherwise electric
shock, physical injury or death and fire may occur. Please do not ignore the warning icons and
instructions with "electric shock".
End of Life

Do not dispose of the inverter together with household waste. The user has the responsibility and
obligation to send it to the designated organization for recycling and disposal.
3.0

Product Overview

This chapter mainly describes the appearance, packaging accessories, name plate, technical parameters and other
information of PSW-G series grid-tied solar inverters.
www.phocos.com 4 | P a g e