Programming The Configuration Data For The Sd-34 - tams elektronik SD-34 Manual

SD-34 | SD-34.2

8.3. Programming the configuration data for the SD-34

Name of CVs
Configuration
data 1
→ SD-34
Configuration
data 1
→ SD-34.2
Advice: When RailCom is not used it is recommended to switch it off in CV#29.
Configuration
data 2
In standard operation the decoder checks directly after having been switched on if the
booster for the connected section supplies a RailCom cutout. In case faulty detections are
mounting the RailCom check should be switched off. This has no effect on the feedback with
RailCom.
CV- Input value
no. (Default)
29 128, 136
(136)
29 0, 8, 128, 136
(136)
33 0, 1
(0)
Remarks and tips
RailCom off
RailCom on
RailCom off
RailCom on
Operation via
points addresses
locomotive addresses
RailCom check on
RailCom check off
English
128
136
0
8
0
128
0
1
Page 29