Furuno TZT16F Installation Manual page 47

Multi function display
Hide thumbs Also See for TZT16F:
Table of Contents

Advertisement

Menu item
[Remote Controller
Configuration]
[Sirius Radio Diag-
nostic]
[Sirius Weather Diag-
nostic]
[Reset Default Set-
tings]
[Initial Setup] menu - [GRAPHIC INSTRUMENTS SETUP]
Menu Item
[Maximum Boat Speed]
[Maximum Wind Speed]
Menu Item
[Minimum Depth]
[Maximum Depth]
[GRAPHIC INSTRUMENTS SETUP] - [SEA SURFACE TEMPERATURE]
Menu Item
[Minimum Sea Surface
Temperature]
[Maximum Sea Surface
Temperature]
[GRAPHIC INSTRUMENT SETUP] - [PROPULSION ENGINE] or [OTHER ENGINE]
Menu Item
[Max. RPM]
[Red Zone Oil Pressure]
[Max. Oil Pressure]
[Min. Temperature]
[Red Zone Temperature]
Menu item
[Total Fuel Capacity]
Description
When there are multiple units in the NavNet network, the Remote Controller
MCU-004/MCU-005 can select the display to show on the unit with MCU-
004/MCU-005 connection. Further, the cycling order of displays can be set.
See the Operator's Manual.
Check the satellite radio of the FURUNO BBWX SiriusXM weather receiver
for proper operation. See the Operator's Manual.
Check the weather section of the FURUNO BBWX SiriusXM weather re-
ceiver for proper operation. See the Operator's Manual.
Reset the system to default settings.
Description
Set the transducer's maximum detectable
speed.
Set the transducer's maximum detectable
speed.
[GRAPHIC INSTRUMENTS SETUP] - [DEPTH]
Description
Set the transducer's minimum detectable
depth.
Set the transducer's maximum detectable
depth.
Description
Set the transducer's minimum detectable
temperature.
Set the transducer's maximum detectable
temperature.
Description
Set the maximum rpm of your engine to
show on the RPM display.
Set the starting value for the red zone area
of the oil pressure meter.
Set the maximum oil pressure of your
engine.
Set the minimum temperature for your
engine.
Set the starting value for the red zone area
of the engine temperature indicator.
Manual Fuel Management
Description
Enter the total fuel capacity of your
tank(s).
3. HOW TO SET UP THE EQUIPMENT
Option (setting range)
[OK], [Cancel]
Options (setting range)
1 (kn) to 99 (kn)
1 (kn) to 99 (kn)
Options (setting range)
1 (m) to 1999 (m)
1 (m) to 2000 (m)
Options (setting range)
0.00°C to 98.99°C
0.01°C to 99.99°C
Options (setting range)
1 (rpm) to 20,000 (rpm)
0 (psi) to 143 (psi)
1 (psi) to 144 (psi)
0.00°C to 99.00°C
0.01°C to 999.00°C
Options (setting range)
0 to 9,999(L).
3-9

Advertisement

Table of Contents
loading

Table of Contents