Transducer (Option) - Furuno TZT16F Installation Manual

PGN Description
060928 ISO Address Claim
NMEA-Request group
function
NMEA-Command group
126208
function
NMEA-Acknowledge
group function
PGN List-Transmit
PGN's group function
126464
PGN List-Received
PGN's group function
126992 System Time
126993 Heartbeat
126996 Product Information
127250 Vessel Heading
127251 Rate of Turn
127257 Attitude
127258 Magnetic Variation
128259 Speed
128267 Water Depth
129025 Position, Rapid Update
129026 COG & SOG, Rapid
Update
129029 GNSS Position Data
129033 Local Time Offset
129283 Cross Track Error
129284 Navigation Data
129285 Navigation-Route/WP
Information
130306 Wind Data
130310 Environmental
Parameters
130312 Temperature
130313 Humidity
130314 Actual Pressure
130316 Temp., Extended Range
2.9

Transducer (Option)

The 12-10P conversion cable (FRU-CCB12-MJ-01, 0.4m, supplied) is required when
connecting a transducer that has a 10-pin connector to TZT16F. Matching Box MB-
1100 is also required when connect 1kW transducer to TZT16F. See the interconnec-
tion diagram for transducer connection. The transducer that has a 12-pin connector
Remarks
For Certification
• Address autonomy
• Receiving output requirement
For Certification
• Address autonomy
• Receiving output requirement
For Certification
Changing the setting of other equipment
For Certification
Sending the confirmation for NMEA-Request group function
and NMEA-Command group function
For Certification
Receiving output requirement
For Certification
Receiving output requirement
For Certification
Receiving output requirement
• Outputs when waypoint is set/changed (own ship's
position is required)
• Outputs when receiving ISO request
Outputs when receiving the ISO request
2. WIRING
Output cycle (msec)
1000
100
100
1000
1000
1000
1000
100
250
1000
1000
1000
1000
100
500
2000
2000
2000
2-9