1MRK514024-UEN A
Section 8
8.1
Product lifecycle
At some point of the product lifecycle, the IED will be upgraded to a next generation unit.
When selecting the original product, already consider the upgrading and extension
possibilities that the specific product offers for its whole lifecycle.
8.2
Checking IED information
The IED information includes detailed information about the device, such as version and serial
number. To find the information navigate through the LHMI menus as indicated below:
1.
Select Main Menu/Diagnostics/IED status.
2.
Select a submenu with
3.
Enter the selected submenu with
4.
Browse the information with
The Product identifiers submenu contains product related information including product
type, serial number, order number, production date and SW version.
The Installed HW submenu contains information about the HW modules.
8.3
Removing the IED
Before removing the IED, make sure that auxiliary power is turned off and all wiring is
disconnected.
8.4
Sending the IED for repair
In case of product problems, contact the nearest ABB office or representative for consultation
and instructions.
8.5
Exchanging the IED
To exchange the IED with another identical unit, remove the IED and install the new one.
Contact your local ABB for information about exchangeable units.
Installation manual
Removing, repairing and exchanging
and
and
For upgrade purposes the IED does not need to be removed. Before removing
the IED check with your local ABB office if the IED can be upgraded.
.
.
.
Section 8
Removing, repairing and exchanging
GUID-D1A48469-E2DB-4E39-8431-1686F13FFC4D v8
GUID-2CAE273B-B384-438A-B21C-C0BC86E203A1 v2
GUID-6F99E661-D319-4782-97E9-3A864B1E972D v2
AMU0600445 v4
GUID-1EB39784-696C-4B2E-B560-4115F721DCAB v9
77