Section 5
Mounting
5.3.4.2
Mounting procedure for side-by-side rack mounting
IEC04000456 V2 EN-US
Figure 7:
PosNo
1
2, 3
4
5
5.3.4.3
IED mounted with a RHGS6 case
A 1/2 x 19" or 3/4 x 19" size IED can be mounted with a RHGS case (6 or 12 depending on IED
size). The RHGS case can be used for mounting a test switch of type RTXP 24. It also has
enough space for a terminal base of RX 2 type for mounting of, for example, a DC-switch or
two trip IEDs.
26
2
1
IEC04000456-2-en.vsd
Side-by-side rack mounting details.
The required torque for the screws is 3.5 Nm.
Description
Mounting plate
Screw
Mounting angle
Washer
3
4
Quantity
2
16
2
16
1MRK514024-UEN A
M11955-2 v4
Type
-
M4x6
-
M4x6
M11953-3 v3
Installation manual