Section 5
Mounting
The same mounting kit is used for side-by-side rack mounting and side-by-side flush
mounting.
A
IEC06000147 V3 EN-US
Figure 2:
Different mounting methods
Description
A
Flush mounting
B
19" Panel rack mounting
C
Wall mounting
D
Side-by-side rack mounting
5.3.1
Flush mounting
5.3.1.1
Overview
The flush mounting kit can be used for case sizes:
•
1/2 x 19"
•
3/4 x 19"
•
1/1 x 19"
•
1/4 x 19" (RHGS6 6U)
Only a single case can be mounted in each cut-out on the cubicle panel, for class IP54
protection.
20
The mounting kits are ordered with the IED from the ordering sheet in the
Product guide . They are also available for ordering in the Accessories guide .
B
Flush mounting cannot be used for side-by-side mounted IEDs when IP54 class
must be fulfilled. Only IP20 class can be obtained when mounting two cases
side-by-side in one (1) cut-out.
C
1MRK514024-UEN A
D
IEC06000147-2-en.vsd
IP10303-1 v1
M11967-3 v4
Installation manual