Section 5
Mounting
5.3.2
19" panel rack mounting
5.3.2.1
Overview
All IED sizes can be mounted in a standard 19" cubicle rack by using a suitably sized mounting
kit consisting of two mounting angles, their fastening screws and washers.
The mounting angles are reversible which enables mounting of IED size 1/2 x 19" or 3/4 x 19"
either to the left or the right side of the cubicle.
22
A separately ordered rack mounting kit for side-by-side mounted IEDs or IEDs
together with RHGS cases should be selected so that the total size equals 19".
Use only the screws included in the mounting kit when mounting the plates and
the angles on the IED. Screws with wrong dimension may damage the PCBs
inside the IED.
1MRK514024-UEN A
IP10313-1 v1
SEMOD127656-5 v4
Installation manual