Mounting And Removing The Asfc Unit; Cabling The Asfc Unit - ABB ACS800 Multidrive Hardware Manual

List of components needed in power supply circuit of frame R8i inverter
Component
Switch fuse kit (switch fuse,
charging resistors, ASFC unit
DC fuses for inverter
Charging circuit fuses
Pair of fibre optic cables for
ASFC – inverter connection
Main DC supply cables/
busbars
Charging circuit cables,
ASFC power supply cables,
switch fuse cables

Mounting and removing the ASFC unit

Mount the unit by snapping the feet onto a 7.5 × 35 mm [EN50022] mounting rail (1).
Remove the unit by bending the feet outwards lightly (2) and lifting the unit
simultaneously (3).

Cabling the ASFC unit

Connect the cables according to the diagrams in chapter
power supply equipped with switch
Acquire...
...from ABB. See ACS800-104 Inverter Module Hardware Manual (3AFE64809032
[English]).
...from ABB or according to the ABB specification. See ACS800-104 Inverter Module
Hardware Manual (3AFE64809032 [English]).
...from ABB or according to the ABB specification. See ACS800-104 Inverter Module
Hardware Manual (3AFE64809032 [English]).
...from ABB or according to the ABB specification. See chapter
ACS800 Multidrive modules Product Reference ((3AFE64813340 [English]).
... according to the ABB specification. See ACS800-104 Inverter Module Hardware
Manual (3AFE64809032 [English]).
... from any source according to the ABB specification. See ACS800-104 Inverter
Module Hardware Manual (3AFE64809032 [English]). Always follow the
specification given by ABB. The cables are connected to drive main circuit.
Mounting
1
Removing
2
2
fuse.
Technical data or
3
Circuit diagrams of inverter
Installation
13