Huawei RMS-SNMP01B User Manual page 63

RMS-SNMP01B SNMP Card
User Manual
Figure 11-5 Upgrade success page

Figure 11-6 Upgrade failure scenario 1
If a power failure occurs during the upgrade, power on the UPS and SNMP card again. After
you log in to the WebUI again, click Go to Step 3 to perform the upgrade again, as shown in
Figure 11-7
Issue 10 (2020-03-20)
When Upgrade progress is 100% for SNMP card software, log in again if the "Connection with the
UPS failed. Check network connectivity and log in again." message is displayed.
If the upgrade fails and the UPS and the SNMP card do not power off, click Activate
again to restart the upgrade, as shown in
(you can skip Step
Copyright © Huawei Technologies Co., Ltd.
Figure 11-6.
1, Step 2, and Step 3).
11 Upgrading the SNMP Card
56