Table of Contents
Advertisement
RMS-SNMP01B SNMP Card
User Manual
Step 4 Run the su command to switch to the root user and enter the root user password, as shown in
Figure
Figure 12-2 Switching to the root user
Step 5 Run the passwd root command to change the root user password. Enter a new password and
re-enter it as instructed and press Enter.
Record and keep the password properly. If you forgot the password, you cannot access the
SNMP card through SSH.
Issue 10 (2020-03-20)
The new password must meet complexity requirements. When changing a password, you can press
Ctrl+C to stop this operation.
12-2.
Copyright © Huawei Technologies Co., Ltd.
12 Changing the SSH Access Password
Figure 12-3
shows the operation screen.
60
Advertisement
Table of Contents
