Table of Contents
Advertisement
RMS-SNMP01B SNMP Card
User Manual
RMS-SNMP01A card does not support connection to a temperature and humidity sensor and
an external dry contact card at the same time.
Figure 3-4 Connecting cables to the external dry contact card
Figure 3-5 DIP switch
Issue 10 (2020-03-20)
Refer to the external dry contact card user manual and set the card address to 8.
switch status of the RMS-RELAY02B. 1 is set to ON and other toggle switches are set to OFF. The baud
rate is set to 9600.
Copyright © Huawei Technologies Co., Ltd.
3 Installation and Basic Settings
Figure
3-5shows the DIP
8
Advertisement
Table of Contents
