Huawei RMS-SNMP01B User Manual page 46

RMS-SNMP01B SNMP Card
User Manual
Figure 4-42 Buttons after one event is expanded
Table 4-7 Buttons after one event is expanded
No.
1
2
3
Adding one job for one event: Select one event (for example, Inverter on), click the button
for adding one job, and the page for adding a job for the event is displayed.
When adding a job, the job types to be selected are: RCCMD Shutdown, RCCMD Message,
RCCMD Execute, and RCCMD TRAP. RCCMD Shutdown is selected by default. For
different job types, you need to enter different contents.

Issue 10 (2020-03-20)
Name
Button for modifying
Button for deleting one
job
Button for test
RCCMD Shutdown: You need to specify the RCCMD client IP address and port. When
the RCCMD client receives the job, it will shut down the terminal which is installed with
the RCCMD software.
Copyright © Huawei Technologies Co., Ltd.
4 Managing the UPS on the WebUI
Description
A dialog box for modifying a job is
displayed after you click this button. You can
modify the job.
You can delete the job by clicking this
button.
If you click this button, the job will be
performed and a message showing test
succeeds or fails will be displayed on the
page.
39