RMS-SNMP01B SNMP Card
User Manual
Figure 4-43 RCCMD shutdown
Figure 4-44 RCCMD message
Issue 10 (2020-03-20)
RCCMD Message: Specify the RCCMD client IP address, port, and message to be
conveyed. The RCCMD client will receive the message. For example, enter "This is a
test message".
RCCMD Execute: Specify the RCCMD client IP address, port, and command to be
executed. For example, enter SHUTDOWN, and the RCCMD client will shut down the
terminal which is installed with the RCCMD software after receiving the message.
Copyright © Huawei Technologies Co., Ltd.
4 Managing the UPS on the WebUI
40