Huawei RMS-SNMP01B User Manual page 41

RMS-SNMP01B SNMP Card
User Manual
Figure 4-33 Page for setting read and write communities for SNMPv1&SNMPv2c (not first time
setting)
The default value of SNMP port is 161, which is subject to change.
Click Download UPS-RFC1628-MIB on the page to download the MIB file which allows a
third-party NMS complying with the RFC1628 standard, such as UNMS of Generex, to
manage the UPS remotely.
Click Download HUAWEI-UPS-MIB to download the MIB file which allows a third-party
NMS complying with Huawei standard to manage the UPS remotely.
Under NMS Address and Permission Settings, you can add NMS information for accessing
the SNMP card. The information includes NMS Addr., Permission, and Trap port, as shown
in Figure 4-34
Issue 10 (2020-03-20)
If you use Huawei NetEco, set SNMP port to 161.

If a third-party NMS complying with the RFC1628 standard, such as UNMS of Generex, is adopted,
download the UPS-RFC1628-MIB file. For details about how a third-party NMS manages the UPS,
see 7 Managing the UPS by Using the NMS Complying with RFC1628
 If a third-party NMS complying with Huawei standard is adopted, download the
HUAWEI_UPS_MIB file. For details about the function of a third-party NMS managing UPS, see
Managing the UPS by Using the NMS Complying with Huawei
and Figure 4-35.
Copyright © Huawei Technologies Co., Ltd.
4 Managing the UPS on the WebUI
Standard.
Standard.
6
34