Installer manual Fleck 9100 SXT - Maintenance
9.4.6
Lower piston and/or front side seal and spacer kit replacement
Caution - material
Risk of damage due to wrong lubricant use !
Do not use petroleum-based lubricants such as vaseline, oils, or hydrocarbon-based
lubricants.
Use only approved silicone grease or soapy water !
1. Remove the power head, see Power head disassembly/replacement [
2. Using pliers, remove the piston (6).
3. Remove the screw (3) and the piston plate (4).
4. Remove the cover cup (5) from the piston (6).
5. Using a small hook, remove a seal (7).
6. Using the puller (1), remove a spacer (8).
7. Repeat the two previous steps for all the seals and spacers.
8. Lubricate all seals (7) with approved lubricant only.
9. Put back a new seal (7) using the stuffer (2).
10. Put back a spacer (8) using the stuffer (2).
11. Repeat the two previous steps for all the seals and spacers.
12. Lubricate the piston (6) with approved lubricant only.
13. Put back the piston (6).
14. Put back the cover cup (5).
15. Put back the piston plate (4) and the screw (3).
16. Rebuild the power head, see Power head disassembly/replacement [
9.4.6.1
Special tools needed
1
Item
Part number
1
13601
2
12763
76 / 108
2
Description
Puller
Stuffer
Ref. MKT-IM-004 / E - 06.10.2020
→
Page 72].
→
Page 72].
Packaging
quantity
1
1