Osd Menu Activation; Osd Menu Navigation; Osd Menu Unlocking - Barco MDSC-8358 MNA Series User Manual

Table of Contents

Advertisement

4.4 OSD menu activation

To activate the OSD menu
1.
If not already done so, switch on the display.
2.
Touch the Enter key.
As a result, the OSD main menu comes up. If no further actions are taken within the following 30 seconds, the
OSD menu will disappear again.
The time-out of the OSD menu automatic close function can be adjusted or disabled in the OSD
menu (OSD Time-out).
The OSD menu position can be adjusted in the OSD menu (OSD Hor. Pos. and OSD Vert. Pos.).
The OSD menu can be locked for access, see "OSD menu lock", page 31. To unlock the OSD menu
by entering the password, see "OSD menu unlocking", page 25.

4.5 OSD menu navigation

To navigate through the OSD menu
Press the enter key to open the OSD menu.
Use the up/down key to scroll to the desired menu page.
When the desired Menu page is highlighted, press the enter key to select the top menu item that will be
highlighted.
Use the up/down key to move to other Menu Items, then press the enter key to select it.
If the selected menu item is controlled by a slider use the up/down keys to adjust the item value, then press
the enter key to confirm.
If the selected menu item is a multiple choices menu use the up/down keys to select the desired option
then press the enter key to confirm.
Press the exit key to exit from the Menu page.

4.6 OSD menu unlocking

About the OSD menu lock
The OSD menu can be locked for access, see "OSD menu lock", page 31. If the OSD menu lock is enabled,
entering the OSD menu will display a ' Request for password' window.
To unlock the OSD menu
1.
If not already done so, switch on the display.
2.
Touch the Enter key.
As a result, the dialog box as shown below comes up if the OSD menu is password protected, see "OSD menu
lock", page 31.
ENTER PASSWORD: _ _ _ _
3.
Enter the password by using the four right keys of the keyboard, you can label the four keys as 1, 2, 3 and 4
(from left to right). So, if i.e. keycode is '4444', it means you have to press four time the Esc key.
K5902141 (451920612593) /02
Daily operation
MDSC-8358 MNA
25

Advertisement

Table of Contents
loading

Table of Contents