Table of Contents
Advertisement
4. Daily operation
As a result, the keys will light up and are now available for further actions. However, if no further actions
are taken within the following 10 seconds, the keys will dim and the keyboard will be locked again.
2. Option 2: Press the Standy key ( ) for 3 seconds and release it when the keyboard is illuminated.
To lock the keyboard:
The keyboard will automatically lock after 10 seconds of inactivity, except while navigating the OSD menu,
during which it remains unlocked.
As a result, all keys except the
4.3
Power mode LED
About the power mode LED
The behavior of the power LED shows the status of the unit:
OFF
Blinking orange
Full orange
Blinking green / orange Searching for signal
Full green
4.4
OSD menu activation
To activate the OSD menu
1. Switch on the display (see "On/Off switching", page 23).
2. Unlock the keyboard (see "Keyboard locking/unlocking", page 23).
3. Press the
key.
As a result, the OSD main menu comes up in the bottom right corner of the screen. If no further actions
are taken within the following 30 seconds, the OSD menu will disappear again.
If after pressing the
enabled. Please refer to "Menu locking/unlocking", page 31for more information and instructions to
unlock the OSD menu.
The time-out of the OSD menu automatic close function can be adjusted or disabled in
the OSD menu (OSD Time-out).
The OSD menu position can be adjusted in the OSD menu (OSD Hor. Pos. and OSD Vert.
Pos.).
24
key will dim to indicate that the keyboard is locked.
Hard OFF (power supply is unplugged)
Soft OFF (switching off by using the stand-by key (
Display is in power save mode (backlight and LCD off)
Note: When Power save mode is enabled, the display will automatically go into
power save mode after 10 seconds of searching without signal.
Display has an image on the screen
key, the OSD lock window appears then this means that the OSD lock has been
K5902105 (451920611791) MDSC-2232 25/08/2015
))
Advertisement
Table of Contents
