Satel GRAPHITE Pet Manual
Satel GRAPHITE Pet Manual

Satel GRAPHITE Pet Manual

Digital passive infrared detector with pet immunity up to 15 kg

Advertisement

GRAPHITE Pet
DIGITAL PASSIVE INFRARED DETECTOR
WITH PET IMMUNITY UP TO 15 KG
The GRAPHITE Pet detector allows detection of motion in the protected area. This manual applies to the
detector with electronics version H (or newer).

1. Features

Dual element pyrosensor.
Digital motion detection algorithm.
Pet immunity up to 15 kg.
Digital temperature compensation.
Adjustable detection sensitivity.
Built-in EOL resistors.
LED to indicate alarm status.
Remote LED enable/disable.
Alarm memory.
Supervision of detector signal path and supply voltage.
Tamper protection against cover removal.

2. Specifications

Supply voltage ...................................................................................................................................12 V DC ±15%
Standby current consumption......................................................................................................................... 12 mA
Maximum current consumption ...................................................................................................................... 14 mA
EOL resistors ............................................................................................................................................ 2 x 1.1 k
Relay contacts rating (resistive load)..............................................................................................40 mA / 16 V DC
Detectable speed...................................................................................................................................... 0.3...3 m/s
Alarm signaling period .......................................................................................................................................... 2 s
Warm-up period .................................................................................................................................................. 30 s
Recommended installation height ....................................................................................................................2.4 m
Environmental class according to EN50130-5 ........................................................................................................II
Operating temperature range ................................................................................................................ -30...+55 °C
Maximum humidity..........................................................................................................................................93±3%
Dimensions ..................................................................................................................................... 63 x 96 x 49 mm
Weight.................................................................................................................................................................76 g

3. Description

After motion is sensed by the detector in the coverage area, the alarm relay contacts will open for 2 seconds.
Supervision features
In the event of the voltage drop below 9 V (± 5%) for more than 2 seconds or the signal path failure, the detector
will signal a trouble. The trouble is indicated by the activation of alarm relay and the steady light of LED
indicator. The trouble signaling will continue as long as the trouble persists.
®
graphite_pet_en 01/15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GRAPHITE Pet and is the answer not in the manual?

Questions and answers

Summary of Contents for Satel GRAPHITE Pet

  • Page 1 DIGITAL PASSIVE INFRARED DETECTOR WITH PET IMMUNITY UP TO 15 KG graphite_pet_en 01/15 The GRAPHITE Pet detector allows detection of motion in the protected area. This manual applies to the detector with electronics version H (or newer). 1. Features ...
  • Page 2 GRAPHITE Pet SATEL Remote LED enable/disable The LED can be enabled/disabled remotely, if the LED has not been enabled using the LED ON/OFF pins. The LED terminal is provided to allow remote LED enable/disable. The LED is enabled, when the terminal is connected to the common ground, and disabled, when the terminal is disconnected from the common ground.
  • Page 3 SATEL GRAPHITE Pet LED enable/disable pins. The LED is enabled, if the jumper is placed over the pins (the pins are shorted). dual element pyrosensor. Do not touch the pyroelectric sensor, so as not to soil it. potentiometer for sensitivity adjustment.
  • Page 4 – at the maximum sensitivity) will activate the alarm relay and make the LED light up. The declaration of conformity may be consulted at www.satel.eu/ce SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND tel. + 48 58 320 94 00 info@satel.pl...

Table of Contents