Satel abax2 APD-200 Pet Instructions Manual
Wireless passive infrared detector with pet immunity up to 20 kg
Hide thumbs
Also See for abax2 APD-200 Pet:
- Manual (16 pages) ,
- Quick start manual (15 pages) ,
- Manual (11 pages)
Subscribe to Our Youtube Channel
Related Manuals for Satel abax2 APD-200 Pet
Summary of Contents for Satel abax2 APD-200 Pet
- Page 1 Wireless passive infrared detector with pet immunity up to 20 kg APD-200 Pet Firmware version 1.00 apd-200_pet_en 02/23 SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND tel. +48 58 320 94 00 www.satel.pl...
- Page 2 13 August 2005). The device meets the technical regulations of the Eurasian Customs Union. SATEL aims to continually improve the quality of its products, which may result in changes in their technical specifications and software. Current information about the changes being introduced is available on our website.
- Page 3 CONTENTS Features ........................... 2 Specifications ........................2 Description ........................3 Radio communication ....................... 3 Alarms ..........................3 Operating modes ......................3 Energy saving mode (ECO) ....................3 Test mode ......................... 3 LEDs ..........................4 Supervision of motion detection system ................4 Battery status control ......................
-
Page 4: Specifications
APD-200 Pet SATEL The APD-200 Pet detector is used to detect motion in a protected area. It is designed for operation within the ABAX 2 / ABAX two-way wireless system. This manual applies to the detector with firmware version 1.00 (or newer), which is supported by: ... - Page 5 SATEL APD-200 Pet Maximum current consumption ..................12 mA Detectable speed ...................... 0.3...3 m/s Warm-up period ........................35 s Recommended installation height ..................2.4 m Coverage area ....................14 m x 16 m, 83° Complied with standards ..........EN50131-1, EN50130-4, EN50130-5 Security grade according to EN50131-2-2 ..............
-
Page 6: Installation
APD-200 Pet SATEL LEDs The LEDs are flashing for about 35 seconds from inserting the battery, thus signaling the warm-up of the detector. The LEDs also work in the test mode, in which they indicates: periodical communication – short flash (80 milliseconds), ... - Page 7 SATEL APD-200 Pet Be particularly careful during installation and replacement of the battery. The manufacturer is not liable for the consequences of incorrect installation of the battery. The used batteries must not be discarded, but should be disposed of in accordance with the existing rules for environment protection.
- Page 8 APD-200 Pet SATEL place for installation. Sometimes, it is sufficient to shift the device ten or twenty centimeters. The ARF-200 tester makes it possible to check the radio signal strength at the place of future installation without having to put the detector there.
- Page 9 SATEL APD-200 Pet...
Need help?
Do you have a question about the abax2 APD-200 Pet and is the answer not in the manual?
Questions and answers