Shelves; Drawers - Thermo Scientific TSX Series Installation And Operation Manual

Installation

7.3 Shelves

All the freezers come standard with wire shelves. Laboratory freezers come
standard with 4 shelves.
Maximum shelf capacity is 45 kg (100 lbs). For safety in shipping, the
shelves are packaged and secured inside the cabinet. Insert the shelf support
hangers (included inside the unit) into the built-in shelf supports (located
on the inside walls of the cabinet interior) at the desired locations. Position
the shelves on the flat supports (refer to Figure 1). Do not position shelving
to disrupt the thermal bottle(s).
Figure 1. Shelf Support Hanger

7.4 Drawers

Drawers can be ordered as an accessory for this unit.
Drawers are shipped in a factory installed position that promotes uniform
spacing between the drawers. The drawer slides are adjustable to higher and
lower positions in the cabinet. You can position these slides in the vertical slots
which are spaced at one-inch intervals. The drawers must be removed in order to
adjust the position of the drawer slides.
The maximum drawer capacity is 27 kg (60 lbs).
CAUTION: Risk of Abrasion. Hidden sharp edges may be present on
drawers. Use appropriate Personal Protective Equipment (such as gloves)
while handling the drawers to avoid possible sharp points related injury.
11
Thermo Scientific TSX -20°C Flammable Materials Storage Laboratory Freezers