Thermo Scientific TSX Series Installation And Operation Manual page 7

Safety Precautions
This symbol indicates a need to use gloves during indicated procedures. If
performing decontamination procedures, use chemically resistant gloves.
Below are important safety precautions that apply to this product:
Use this product only in the way described in the product literature and in this
manual. Before using it, verify that this product is suitable for its intended use. If
the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
FMS units are NOT designed for use in Class I, Division 1 classified
environments, which require explosion-proof models.
WARNING: Risk of Fire. Keep away from open flames and ignition
sources. FMS units are designed for use in laboratory environments with
adequate ventilation.
WARNING: Risk of Injury. The port hole in back of the unit allows the
use of redundant temperature monitoring devices. All probes introduced
into the cooling chamber MUST be suitable for use in Class I, Division 1
environments.
WARNING: Use appropriate Personal Protective Equipment (PPE) while
handling the materials to avoid possible injury. Operators should be trained
in the handling of all potentially hazardous materials.
Always store flammable materials in closed containers. Follow the Standard
on Fire Protection for Laboratories Using Chemicals, NFPA 45-2011,
Clause 10.5.2.
WARNING: Risk of Shock. Your unit must be properly grounded in
conformity with national and local electrical codes. Do not connect the unit
to overloaded power sources.
WARNING: Risk of Shock. Disconnect the unit from all power sources
before cleaning, troubleshooting, or performing other maintenance on the
product or its controls.
WARNING: Risk of Fire. This unit is charged with hydrocarbon
refrigerants. Only qualified service personnel should service this unit.
3
Thermo Scientific TSX -20°C Flammable Materials Storage Laboratory Freezers