Table of Contents
Advertisement
FLUID LEVELS
Engine Oil
Taylor-Dunn does not recommend the use of oil additives.
The location of the engine oil dipstick will vary depending
on the engine installed in your vehicle.
Before checking engine oil level: Turn engine off and wait
10 minutes to allow oil to return to the oil pan.
Oil level should be between the ADD and FULL marks
on the dipstick.
Only add oil if level is BELOW the add mark on the
dipstick.
Only use oil displaying the appropriate American
Petroleum Institute (API) Symbol on the container.
Oil type and capacities
Engine
GM 3.0
Recommended Viscosity
Engine
GM 3.0
Engine Dipstick Location
Page 38
Capacity
Type API
(quart/liter)
SJ or SH
4.5/4.25
Temp (°C)
Temp (°F)
-18 to 50
0 to 122
-25 to 0
-13 to 32
Viscosity
10W30
5W30
Tiger CUB Operator Manual
MT-030-60C-C
Advertisement
Table of Contents
