Fuel System Maintenance; Replacing The In-Line Fuel Filter - Toro TimeCutter SW 4200 Operator's Manual

Fuel System
Maintenance
DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you, others, and
can damage property.
• Perform any fuel-related maintenance
when the engine is cold. Do this outdoors
in an open area. Wipe up any fuel that
spills.
• Never smoke when draining fuel, and stay
away from an open flame or where a spark
may ignite the fuel fumes.
Replacing the In-Line Fuel
Filter
Service Interval: Every 100 hours/Yearly (whichever
comes first)—Check the in-line fuel
filter.
Every 200 hours/Every 2 years (whichever
comes first)—Replace the in-line fuel filter.
Never install a dirty filter if it is removed from the fuel
line.
1. Park the machine on a level surface and
disengage the blade-control switch.
2. Ensure that the brake is engaged, shut off the
engine, remove the key from the key switch, and
wait for all moving parts to stop before leaving
the operating position.
32
Figure 37
g027959
g033082